Pressmaster CSA0760 Crimp Tool

 

Pressmaster Crimpers

Pressmaster is deeply rooted in the heartland of Sweden – a country with a strong tradition of manufacturing some of the world’s best hand tools. The people of the region of Älvdalen have a long history of adapting to their environment by creating clever solutions. Pressmaster develops precision hand tools for markets where performance and reliability are vital. They work with tight tolerances and the highest quality all the way from CAD design through to manufacturing and assembly. The manufacturing process is regularly controlled by optical measuring equipment and supervised by highly skilled personnel. Pressmaster tools have extremely long life spans.

This product is the equivalent of the APEX part# MAC2210

Professional Crimping Tools

The process of crimping involves a connector and a wire being deformed in a way that makes them hold together. While there are many options for crimping available, the Pressmaster family of crimp tools provides a tight and solid crimp that allows cables and connectors to be held together while not damaging the functionality of either. In addition, they require much less time, manual strength, and expertise than other competing crimp tools in order to operate. The precision dies and crimp profiles allow you to consistently obtain the same crimps repetitively, without a loss in quality or risk of damage to cables.

How To Crimp

The process of crimping a cable and appropriate connector together is easy and quick when using Pressmaster Crimp tools. First, insert the desired cable into an appropriate connector. Next, insert both into the crimp tool. Grasp the open handles of the crimp tool firmly and press down completely. There is no need to worry about over crimping as long as you are using the correct crimp tool. Lastly, once the tool's handles are closed completely, the latch on the crimp tool will release, automatically opening the handles and the crimp end. If the crimp tool ever seems to be stuck, make sure you are pressing together and closing the tool completely. This ensures a consistent and correct crimp every time.

How To Adjust the Crimp

You may need to eventually adjust the variances of the crimp tool, either because the tool has exceeded it's normal life span and is beginning to lose precision, or in case the tool is damaged. This should not happen too often, as Pressmaster tools are designed to work for over 50,000 crimp cycles and built to withstand abrasion and impacts. To do this, simply loosen the screw on the variance wheel, and adjust the wheel according to your preferences. When done, tighten the screw on the wheel and the new variance will be set

(1409)

Pressmaster CSA0760 Crimp Tool

 

Height: 70 mm/1.19"

Length: 225 mm/8.86"

Width: 21 mm/0.83"

Weight: 540 gr/1.19 lb

Crimp dimensions (mm): 0.75 - 1.5 / 1.5 - 2.5 / 2.5 - 6

Crimp dimensions (inches): 22 - 16 / 16 - 14 / 14 - 10

Connector: Pre-Insulated Terminals and Splices

Cables: Insulated Connectors

SKU 1409
Brand PRESSMASTER
Unit Of Measure ea

Be The First To Review This Product!

Help other Oceania Engineering Solutions Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category